Product DetailCurrent Location :Home > Products > UL T8 Tube
UL DLC Approval T8 Tube 9W/18W/24W
  • UL DLC Approval T8 Tube 9W/18W/24W
  • UL DLC Approval T8 Tube 9W/18W/24W
UL DLC Approval T8 Tube 9W/18W/24W

Model Number:           LTT60/LTT120/LTT150

Power:                      9W/18W/24W

Size:                          26*600mm/1200mm/1500mm

Input Voltage:            AC 90-277V 50Hz/60Hz

Material:                     Aluminum Alloyed Housing+PC Cover

CCT:                          3000/4000/5000/6000

Description

Brief Introduction

This high Lumen  UL T8 LED Tube Light uses SMD LED3528 as source and there are 600mm (2 feet), 1200mm (4 feet), 1500mm (5 feet) and 2400mm(8feet) available. With longer lifespan(>30,000hours), higher brightness and less toxic substance, it can be widely used to replace the traditional fluorescent tube lights. This type of Tube Light adopts the standard G13 socket and works with AC90-277V. It is UL and RoHS certificated.

T8 LED Tube Details 



T8 LED Tube Features

T8 LED Tube 9W 2ft, 18W 4ft, 24W 5ft Tube Light with UL Certification featured by beveled (oval shape tube) and round (round shape tube) end caps

Single LEDs light source of 18-25 lumen with 3 years warranty

Isolated power supply with 230 mA(9W) /450mA(18W)/600mA(24W) constant electrical current input

Inside buckled frosted lens with 0.85-0.88 light emitting rate

Anodic alloyed aluminum housing to protect surface from scratch



T8 LED Tube Application

LED Tube can be applied in indoor LED lighting places, as office, meeting room, school, supermarket, etc.

Please go to About Us, Application for more detail



T8 LED Tube Parameters

Model NO.

LTT60/LTT120/LTT150

Optical Parameters

Light Source

SMD LED3528

Luminous Flux(lm)

900/1800/2400

CCT(K)

4000-6500

CRI(Ra)

>80

Beam Angle

120-160 degree

Light Attenuation ratio (%)

Less than 10% in 3 years

LED Quantity

60/120/144

Electrical Parameters

Input Voltage(V)

AC90-277V

Frequency(Hz)

50/60HZ

Output Voltage(V)

DC28-42V

Total Power(W)

9/18/24

Power Factor

0.92

Lifespan (Hrs)

>50,000

Dielectric Voltage Withstand Test

3500Vac/60s

Structural Parameters

Material

Aluminum housing &PC cover

Size(mm)

D26*600/1200/1500

Length(mm)

600/1200/1500

Net Weight(g)

210/410/520

Integrated Parameters

Operating Temperature

-10 to 40 degree

Storage Humidity

-40-85 degree

Safety Requirement

UL

Environmental Directives

RoHS

 

T8 LED Tube Installation

LED Tube Light Wiring Diagram:


Installation Instructions
1)Turn off the electricity supply before installation .
2)For refitting old fluorescent lamp with a single-side-power-input LED tube, please re-connect your wire as the following diagram.


3)For diagram A1 loop with magnetic ballast & starter, please remove the starter first. Then connect line N and Line L to the same side socket but separately. Now you can put on the LED tube and turn it on. And the loop has been changed into the one as showed in diagram A2.


Note: You can just keep magnetic ballast as it was. However, it will consumer some power. For saving energy, it is still suggested to remove it if your labor cost is not so high.

4) For diagram B1 loop with electronic ballast, please remove the electronic ballast first. Then connect line N and Line L to the same side socket but separately. Now your LED tube light is ready to work. And the loop has been changed into what showed in diagram B2.


T8 LED Tube Package




Package for Project: EPE Foam + Carton

Every 5/6 LED tubes can be put into one piece of EPE Foam and 5 pieces of EPE Foam to one carton




Package for Batch: Paper Tube+Carton

Each LED tube can be put into one paper tube and every 25 paper tubes to one carton




Package for Batch: White paper Box+Carton

Each LED tube can be put into one white paper box and every 25 boxes to one carton




About Liteto LED Tube




Focus on LED Tubes

Specialized in manufacturing, researching, and developing LED tubes

Liteto has good reputation in customers at home and abroad.

 

Production Capability

With one dedicated workshop equipped with advanced machines and over 20 skilled workers, our production capability has reached 40,000 pieces of LED tube lights per month.

 

R&D Strength

Professional R&D team to guarantee the stable performance of products:

24 Hours non-stop aging test

Strictly selected material suppliers, all suppliers are providing sample test for a year. The ones passing the one-year sample test will be listed as qualified suppliers.

 

Product Quality

Reliable LED chip suppliers Samsung, Epistar and Sanan

Mitsubishi Optical grade PC cover to reduce light failure and improve heat dissipation

Phosphor from Mitsubishi, Hung Ta or Intematix

Complied with UL, CE, RoHS, FCC, DLC.  (according to certain product model)

 

Factory Direct Price

We are the manufacturer of LED tubes, which enables us to offer our customers factory direct price. Meanwhile good relationship with our material suppliers, skilled staff and advanced facilities make it possible for us to quote the competitive price.

 

LED Tube OEM&ODM Project

As one professional LED tube supplier in Shenzhen City, China, OEM&ODM project is well available.



 

Warning
Overall energy efficiency and light distribution of any installation that uses such lamps are determined by the design of the installation.

 





Pre:High Lumen Efficacy 3750V
Next:Integrated LED T8 Tube 18W 4ft Tube Light
ABOUT US
Company Profile
Company Culture
Why Liteto?
Certificates
Factory Tour
Application
Technology
PRODUCTS
Tube Light
Panel Light
Projecting Light
Light Source Plate
High Bay Tube-Beam Directional
High Bay Tube-HighLux
High Bay Light-UFO
High Bay Light-Flood
Grow Light
Studio Light
Linear Light
NEWS
Company News
Industry News
CONTACT US
Shenzhen Liteto Electronics Co., Ltd.
Tel:+86-755-8618,2329
E-mail:info@liteto.com
Address:Unit D, 3rd Floor, Building B, Chengtiantai Industry Park, No, 9 Huaxing Road, Dalang, Longhua Dist, Shenzhen, Guangdong, China